Видео

Power lead don't look long enough if you installing them around the outside the house, I suppose you could chop and wire longer 2 - core cable to a power junction box if you need to install more than one around the outside.

The lip you left on the ply cannot be 50mm. That would have been half the width of your 100mm ply. More like 10-20mm max I would have said.

Awesome I also appreciate that you teach along the way and share the measurements aswell.❤

Excellent, these turned out really well, even though you are not artistic they look pretty damn good to me 👍

Thank you Sir 🎉

Thank you Sir.🎉

At 6:49 when you mount the Z-axis to the gantry I experience a problem. The plate on the gantry is without movement. But when I mount the Z-axis on that plate, the whole thing becomes wobbly. You can move the Z axis from right to left regarding the gantry. Tightening the mounting of the Z axis on the gantry plate does not provide any improvement. If the Z axis can move in the horizontal plane then the result of the work you do with it will be of low quality. Is there anyone who has experienced the same problem and can tell us how he solved it? Thanks in advance.

Great video still need a slight tweak to a corner or two but everything is working pretty good so far. Bought the same plate you have as well.

I wasn’t able to use the mat that long that came in box before it was damaged.

Had my first kickback incident today. Was trying to make some featherboards and stop blocks. Heard a loud pop and the wood went flying then immediate pain in my hand. Happened so fast I don't even know what happened but my guess is somehow the wood piece smashed my finger against the miter saw base. Icing my finger which is inflated and I have black blood under my nail and a small chunk of skin next to my nail was ripped off. I'm just happy my hand didn't come in contact with the blade.

Hi Tomasz, I enjoyed watching this which is a change from woodworking (even though I do enjoy woodworking). By the way on your video a few months ago regarding trying to improve the dust extraction on your table saw I made a comment you needed a high volume low pressure extraction system I also noticed you have a zero clearance fitted to your saw this will also contribute to the reduced performance of the extraction, I would also consider adding some openings in the zero clearance to allow air to be pulled through into the table saw, refer to the video posted by “Hooked on Wood”. Have you made any plans on a video on using your new extraction system yet?

fantastyczne dzieło 👍

Brilliant!!

What a beautiful work, Tomasz! 😃 Really well done!!! Stay safe there with your family! 🖖😊

Sounds like a Jet taking off.🤣🤣

Shopping for Resin: Shopping with 10% discount code：Tomasz10 Let's Resin main page：letsresin.com/?ref=casualdiy Epoxy Resin Casting Tutorial Playlist: ruclips.net/p/PL3AlKP5QE9tkD57u1WT5GbMEFR5tzkMmv

Titan pillar drill is £89 in Screwfix. Is this a different model

Yes, as beaufighter245 said, very nicely and efficiently done! What about using this jig for making picture frames with 45 degree corners? I would think it might not center well due to the small length of the joined surface. However, with that said, for those of us who only want to do this once in a while the expensive jigs seem an excessive expense. So, again, thanks.

I think the main issue with my prints being bad in the first place was a bad stock extruder. Got this one, calibrating e-steps now and just got the community firmware as well. Much-needed additions honestly.

👍 You nailed it my friend. Thanks again just watched the full video and the adverts for the floor mop,🤣

What are dimensions of the block of oak?

Nice clear video. Like to add one of these to my Metabo KGS216M Compound Mitre Saw. That thing starts with such a jolt if often knocks my workpiece off line.

😅 lern how tu use fance 😂 because it is ok. Sometimes you need to make adjustments and with metabo you can

How can we add text like city name ?

Hi . Really really helped me setup my saw ! Was really dreading it , but cheers for your help, 😊

1/4” collect? Trend doesn’t work on Australia. So I am fighting to find a good router.

Brilliant idea. Now can you think 💭 of making a stand for working on Mobility Scooter by any chance? Look for Pride GoGo Plus Travel Scooter. Take care matey!!! Cheers!!!

Great video thanks from Pearland, Texas

Nice way of doing It. Thanks a lot from Brazil

My bicycle repair station was the ground, never had a problem of it falling over 🤣 Just a general observation .... why do people on YT struggle to hold something down/steady while performing an operation on it ... it would be faster/easier if secured properly 👍

Trying to comment, RUclips keeps on removing it ... not even being abusive as normal 🤣 .... will keep on trying .....

Can you put a mold in the pressure pot

Every knife is beautiful, the one I liked the most is dark straight knife with resin ❤

Fantastic! I currently work on my own wooden knife, from some quite strong wood named ‘marupa’ in Portuguese. It is always good to see how others do similar projects

Looks very useful. One minor thing I would add is a way to lock the bike in place, to prevent it from being knocked off while it’s being worked on. Something simple like a hole through the two black pieces, for a removable dowel to slot into.

Were the blades the same age with same amout of use?

Hi there, please could I ask what was the name of the bolt and nut that you used that allows the shelf to flip / rotate up and down?

Cool jig! I've got my own, but you've just given me a great idea on how to improve it. Thanks.

great stuff Tomasz will be making those they look great and you looked chuffed they work lol😂

nice one Tomasz am liking the ideas you are coming up with! At least you are building something not like all the tool review channels

Hi Casual DIY, I enjoyed your video, but am confused about the marking and order of the ends to be cut. The video speeds up at a crucial point when the pices are being reset for the second two cuts. Also, please explain why we don’t simply cut A1/B1, A2/B2, etc. Thank, David

well done

Brilliant idea, Tomasz! Really well done! 😃 You could also use leather in the arms there... And the idea to make places to store tools is great as well! Anyway, stay safe there with your family! 🖖😊

@Casual DIY , I obtained the same bed which is 4mm thickness and I also have a CR touch automatic bed leveler for my Ender 3 (not the pro) that has a 4.2.7 board (I believe). are there any videos you recommend to help me to succeed at printing with this style of set up? I also noticed you are not using the included rubber separators that came with the glass bed. Why is that? I al using the rubber spacers but have noticed that it does not correctly level the bed. should I use those with the springs?

Why do you use the butterfly filter? just curious. It would be hilarious if you used a Fly filter XD, much more accurate.

Full video here - ruclips.net/video/SqPPd9Y1SdM/видео.html

Thanks Tomasz! I wanted a quick reminder to see if a featherboard would help cutting very thin strips and this was perfect. Bonus: I was wondering how to incorporate a router table into my workbench and noticed yours!

When you say, "massive square," how much bigger than your actual design?

Nice one Tomasz will get the wife building one tomorrow if it ever stops raining lol